Ultimate Starter Kit for UNO R3 with Tutorial CD
This kit include over 60 kinds of components and sensors .It can interact with buttons, LEDs, motors, speakers, GPS units, cameras, the internet, and even your smart-phone. Which meet your demands for your different project. By connecting the UN board with a personal computer via USB cable and uploading programs to the board, users can create digital devices and interactive objects that can sense and control objects in the physical.
- Cost-effective beginner
- To help beginner to learn
- Easy Learning - Detailed PDF tutorial
- To provide excellent service for customers
Detail Tutorial help you to learn electronics and programming
Don't be nervous if you are a beginner Our tutorial contains detailed wiring diagrams, codes and libraries. Just follow our tutorial and step by step you will come to realize that learning electronics is interesting It's the best choice and nice gift for your friends, family and kids to learning electronics and programming.
What programming software is required?
Arduino IDE should be used to program the Arduino uno r3 microcontroller.
Simply, follow the steps mentioned in the tutorial to download IDE.
LAFVIN Starter Kit for Arduino UNO R3 Ultimate Starter Set Full Version Learning DIY Kit Project for UNO with Tutorials
Notice:The Charger we default to send the EU plug, if you want to change to US or UK plug, please leave a message to us on the order.
Component listing:
- 5pcs White LED
- 5pcs Yellow LED
- 5pcs Blue LED
- 5pcs Green LED
- 5pcs Red LED
- 1pcs RGB LED
- 5pcs 22pf Ceramic Capacitor
- 5pcs 104pf Ceramic Capacitor
- 2pcs Photoresistor
- 1pcs Thermistor
- 5pcs Diode Rectifier (1N4007)
- 2pcs Electrolytic Capacitor (10UF 50V)
- 2pcs Electrolytic Capacitor (100UF 50V)
- 5pcs NPN Transistor (PN2222)
- 5pcs NPN Transistor (S8050)
- 1pcs Tilt Switch
- 5pcs Button (small)
- 1pcs 1 digit 7-segment Display
- 1pcs 4 digit 7-segment Display
- 1pcs Sound Sensor Module
- 1pcs LCD1602 Module (with pin header)
- 1pcs IC L293D
- 1pcs IC 74HC595
- 1pcs Active Buzzer
- 1pcs Passive Buzzer
- 1pcs RTC Module
- 1pcs DHT11 Temperature and Humidity Module
- 2pcs Potentiometer (10k)
- 1pcs Rotary Encoder Module
- 1pcs Joystick Module
- 1pcs Keypad Module
- 1pcs 5V Relay
- 1pcs IR Receiver Module
- 1pcs R3 Controller Board
- 1pcs 830 Tie-Points Breadboard
- 1pcs Servo Motor (SG90)
- 1pcs Stepper Motor
- 1pcs ULN2003 Stepper Motor Driver Board
- 1pcs Prototype Expansion
- 1pcs Power Supply Module
- 1pcs HC-SR501 PIR Motion Sensor
- 1pcs Ultrasonic Sensor
- 1pcs GY-521 Module
- 1pcs 3V Servo Motor (Soldered Wire)
- 1pcs Fan Blade
- 1pcs MAX7219 Module
- 1pcs Remote
- 1pcs 9V 1A Power Supply
- 1pcs 65 Jumper Wire
- 1pcs Water Lever Sensor
- 1pcs USB Cable
- 1pcs 9V Battery Connector with DC
- 1pcs RC522 RFID Module
- 10pcs Resistor (10R)
- 10pcs Resistor (100R)
- 10pcs Resistor (220R)
- 10pcs Resistor (330R)
- 10pcs Resistor (1K)
- 10pcs Resistor (2K)
- 10pcs Resistor (5K1)
- 10pcs Resistor (10K)
- 10pcs Resistor (100K)
- 10pcs Resistor (1M)
- 20pcs Female-to-male Dupont Wire
- 1pcsResistance Identification Card
- 1pcs CD with Tutorial
Preferred Age?
Since this kit could be programmed by "Arduino Code" we may say that's it is suitable for 10+ years old kids.
